Maintenance and Tips

Sacrificial anode for hot tub: role and installation

Sacrificial anode: protect your hot tub heater Intro: Small part, big role: the sacrificial anode protects your hot tub heater from corrosion. Discover what it does, how to install it in a few simple steps, and when to replace it.

Wood stove of a Storvatt Nordic bath seen from above, fire lit and chimney, under the snow
Difficulty level
Easy
Estimated time
2 min

What is the purpose of the sacrificial anode in a Nordic bath?

The stove that heats your bath water is in permanent contact with it. The sacrificial anode protects it from corrosion by attracting corrosive elements to itself.

Its name says everything about its role: it "sacrifices" itself. It is the one that degrades, instead of the stove and the metal parts of the bath. The principle is well-known: you can find it, for example, in water heaters.

Its wear is therefore normal: it is proof that it is fulfilling its mission. This protection applies to Nordic baths equipped with a stove.

Emptying Your Nordic Bath Before Winter

  1. Locate the furnace bracket

    The bracket is located on the furnace, inside the bath. The sacrificial anode is attached to it.

    Anode Vue Générale
  2. Unscrew the air vent three turns

    On the filter cover, unscrew the air vent three turns to let trapped air escape.

    3D exploded diagram: anode attachment using a wing nut, arrows indicating insertion and tightening
  3. Secure the sacrificial anode

    Position the anode on the bracket, then screw the wing nut back on to hold it in place.

    3D Diagram: Fastening an anode with a wing nut on a Red Cedar Storvatt tank

    Tip: Once secured, the anode is positioned vertically under the bracket and is held firmly in place by the wing nut. Your sacrificial anode is now properly installed.

A question about your Storvatt?

Our team advises you to choose the model suited to your needs and accompanies you in its maintenance.

FAQ

How long does a sacrificial anode last?

On average, it is estimated that a replacement is needed once a year to ensure optimal protection of the furnace. This is an average: regularly check the condition of the anode to anticipate when it needs to be changed.

Is a worn sacrificial anode a sign of a problem?

No, it is its normal operation. The anode attracts corrosive elements to itself and wears down to protect the furnace. You just need to replace it before it is completely depleted.

Do you need a tool to install a sacrificial anode?

No. The anode is fastened with the wing nut already present on the stove bracket, which can be screwed and unscrewed by hand.

Read also

All posts